IMPROVEMENT OF AUTOMOTIVE HYDRAULIC SYSTEMS THROUGH ELECTRO-HYDRAULIC CONTROL, ENERGY MANAGEMENT AND CONDITION MONITORING
Keywords:
Automotive hydraulics, electro-hydraulic control, brake-by-wire, power steering, active suspension, energy efficiency, condition monitoring, hydraulic pressure control, predictive maintenance, vehicle safety.Abstract
Automotive hydraulic systems remain essential in braking, steering, suspension, transmission actuation and several auxiliary functions because they provide high force density, compact actuators and reliable transmission of mechanical power. Nevertheless, conventional hydraulic arrangements often operate with continuous pump delivery, throttling losses, delayed pressure response, temperature-dependent fluid properties and limited diagnostic capability. These characteristics increase energy consumption and can reduce control accuracy, particularly in electric, hybrid and highly automated vehicles. The purpose of this study is to develop an integrated engineering framework for improving automotive hydraulic systems through on-demand electro-hydraulic actuation, closed-loop pressure control, energy storage, condition monitoring and fault-tolerant architecture. The research combines a structured review of published studies with analytical modelling of fluid flow, actuator force, leakage and energy consumption. A representative electro-hydraulic brake subsystem is used to demonstrate the proposed approach, while steering and active suspension applications are considered to evaluate the wider relevance of the method. Illustrative simulations show that closed-loop pressure control can shorten the time required to reach the commanded wheel-cylinder pressure and substantially reduce overshoot compared with a conventional open-loop hydraulic arrangement. A normalized duty-cycle analysis also indicates that replacing a continuously driven pump with an intelligent on-demand motor-pump unit can reduce the relative hydraulic energy demand. The study further shows that pressure, temperature, moisture and contamination sensing can support predictive maintenance and improve functional safety. The proposed improvement strategy does not eliminate hydraulic technology. Instead, it transforms conventional hydraulics into a sensor-rich, electronically controlled and energy-aware mechatronic system. Such integration is especially important for electric vehicles, brake-by-wire functions, automated driving and advanced chassis control.
References
Jonner, W. D. et al. Electrohydraulic Brake System - The First Approach to Brake-by-Wire Technology. SAE Technical Paper 960991, 1996. DOI 10.4271/960991.
Pan, N. et al. Design, Modeling and Simulation of a New Compact Electro-Hydraulic Brake System. SAE Technical Paper 2014-01-2535, 2014. DOI 10.4271/2014-01-2535.
Zhao, X. et al. A Review of One-Box Electro-Hydraulic Braking System: Architecture, Control, and Application. Sustainability, 2024, 16, 1049. DOI 10.3390/su16031049.
Xu, B. et al. Research and Development of Electro-Hydraulic Control Valves Oriented to Industry 4.0: A Review. Chinese Journal of Mechanical Engineering, 2020, 33, 29. DOI 10.1186/s10033-020-00446-2.
Hur, J. Development of an Electric Motor-Driven Pump Unit for Electro-Hydraulic Power Steering with 42 V Power-Net. International Journal of Automotive Technology, 2010, 11, 593-600. DOI 10.1007/s12239-010-0071-8.
Wi, H. et al. Effects of FTP-75 Mode Vehicle Fuel Economy Improvement Due to Types of Power Steering System. International Journal of Automotive Technology, 2009, 10, 771-776. DOI 10.1007/s12239-009-0090-5.
Lv, X. et al. Research Review of a Vehicle Energy-Regenerative Suspension System. Energies, 2020, 13, 441. DOI 10.3390/en13020441.
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution 4.0 International License.
Articles published in IQRO — Scientific Methodological Journal are licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
Authors retain copyright and grant the journal the right of first publication.
Users may read, download, copy, distribute, print, search, or link to the full texts of articles, provided that the original authors and the journal are properly cited.
Published materials may be used, distributed, and reproduced in any medium, provided that the original work is properly cited.



Uzbekistan
Türkiye
Kazakhstan
Kyrgyzstan
Turkmenistan
Azerbaijan
India
Republic of Korea
Japan
United States of America
Kosovo