ELEKTROMOBIL AKKUMULYATOR BLOKLARI UCHUN OLOVGA CHIDAMLI VA ISSIQLIK IZOLATSIYALOVCHI POLIMER–MINERAL KOMPOZITSIYALARNI LOYIHALASHNING KIMYOVIY-TEXNOLOGIK ASOSLARI

Authors

  • Soataliyev Diyorbek Bahodir o‘g‘li Namangan davlat texnika universiteti magistranti

Keywords:

elektromobil, litiy-ion akkumulyator, polimer–mineral kompozit, magniy gidroksid, aluminiy gidroksid, aerogel, anтипiren, termik qochish, issiqlik izolatsiyasi

Abstract

Maqolada elektromobil litiy-ion akkumulyator modullarining issiqlik xavfsizligi uchun polimer–mineral kompozitsion qatlamlarni shakllantirish prinsiplari ilmiy adabiyotlar asosida tahlil qilinadi. Mg(OH)₂ va Al(OH)₃ anтипirenlarining endotermik parchalanishi, SiO₂ aerogelining issiqlik izolatsiyasi hamda polimer matritsa bilan mineral faza orasidagi adgeziya masalalari bir tizimda ko‘rib chiqiladi. Ikki qatlamli funksional arxitektura va uning sinov algoritmi taklif qilinadi. Maqola eksperimental natijalar hisoboti emas; tavsiya etilgan tarkiblar va texnologik parametrlar tajribada tekshirilishi lozim.

References

Feng X., Ouyang M., Liu X., Lu L., Xia Y., He X. Thermal runaway mechanism of lithium ion battery for electric vehicles: A review. Energy Storage Materials. 2018;10:246–267. https://doi.org/10.1016/j.ensm.2017.05.013

Jiang Y., Jiang Y., Wang P. A review on mitigating thermal runaway propagation in battery packs: from mechanisms to modeling and design optimization. Energy Advances. 2026;5:777–809. https://doi.org/10.1039/D5YA00351B

Research progress of aerogel used in lithium-ion power batteries. Journal of Loss Prevention in the Process Industries. 2024;92:105433. https://doi.org/10.1016/j.jlp.2024.105433

Fire retardant action of mineral fillers. Polymer Degradation and Stability. 2011;96(8):1462–1469. https://doi.org/10.1016/j.polymdegradstab.2011.05.006

ASTM E1461-13(2022). Standard Test Method for Thermal Diffusivity by the Flash Method. ASTM International. https://doi.org/10.1520/E1461-13R22

ISO 5660-1:2015. Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Cone calorimeter method. International Organization for Standardization. https://www.iso.org/standard/57957.html

UL Solutions. Combustion (Fire) Tests for Plastics: UL 94 flame ratings. https://www.ul.com/services/combustion-fire-tests-plastics

Downloads

Published

2026-10-14