PERFORMANCE AND MECHANISTIC INTERPRETATION OF MODIFIED β-HEMIHYDRATE GYPSUM DRY-MIX PLASTERS CONTAINING MICROCALCITE AND FUNCTIONAL ADMIXTURES
Keywords:
β-hemihydrate gypsum, dry-mix plaster, microcalcite, cellulose ether, citrate retarder, superplasticizer, water demand, adhesion strength, hydration kineticsAbstract
The development of workable, dimensionally stable gypsum finishing mortars requires coordinated control of water demand, calcium sulfate hydration and early-age interfacial bonding. This paper presents an expanded scientific interpretation of previously reported laboratory observations on modified dry-mix plasters formulated with β-calcium sulfate hemihydrate, ground microcalcite, hydrated lime, cellulose ether and a commercial superplasticizer (Poliplast SP-1). The available source records an initial water requirement of 55–65% for G-6 gypsum, a relative decrease of 18–23% in the water-to-gypsum ratio after admixture modification at a reported dosage of 0.3–0.5% of binder mass, and a seven-day adhesion strength of 2.6 MPa compared with 2.0 MPa for the control. The corresponding calculated improvement in adhesion is 30%. Citrate-related addition at 0.03–0.05% was reported to delay setting; a setting duration of up to 90 min was also mentioned, although the source does not consistently distinguish citric acid from a citrate salt or identify the setting endpoint. These observations are critically examined using established models of particle dispersion, hemihydrate dissolution–dihydrate precipitation, crystal growth inhibition, cellulose-ether-mediated water retention and filler packing. Plausible mechanisms are distinguished from experimentally demonstrated findings. The interpretation indicates that lower mixing-water demand and improved interfacial water management could contribute to the higher measured adhesion, whereas claims about pore refinement, water resistance and crack suppression require independent verification. A targeted experimental validation framework is proposed to separate the contributions and interactions of each ingredient. The resulting formulation concept is promising for interior plaster applications but remains a preliminary, incompletely characterized materials system.
References
Gurgul, S. J., Seng, G., & Williams, G. R. (2022). The effect of additives on the hydration of CaSO₄·0.5H₂O: A synchrotron X-ray diffraction study. Journal of Solid State Chemistry, 305, 122671. https://doi.org/10.1016/j.jssc.2021.122671
Magallanes-Rivera, R. X., Escalante-García, J. I., & Gorokhovsky, A. (2009). Hydration reactions and microstructural characteristics of hemihydrate with citric and malic acid. Construction and Building Materials, 23(3), 1298–1305. https://doi.org/10.1016/j.conbuildmat.2008.07.022
Lanzón, M., & García-Ruiz, P. A. (2012). Effect of citric acid on setting inhibition and mechanical properties of gypsum building plasters. Construction and Building Materials, 28(1), 506–511. https://doi.org/10.1016/j.conbuildmat.2011.06.072
Peng, J., Qu, J., Zhang, J., Chen, M., & Wan, T. (2005). Adsorption characteristics of water-reducing agents on gypsum surface and its effect on the rheology of gypsum plaster. Cement and Concrete Research, 35(3), 527–531. https://doi.org/10.1016/j.cemconres.2004.04.016
Bülichen, D., Kainz, J., & Plank, J. (2012). Working mechanism of methyl hydroxyethyl cellulose (MHEC) as water retention agent. Cement and Concrete Research, 42(7), 953–959. https://doi.org/10.1016/j.cemconres.2012.03.016
Bülichen, D., & Plank, J. (2013). Water retention capacity and working mechanism of methyl hydroxypropyl cellulose (MHPC) in gypsum plaster—Which impact has sulfate? Cement and Concrete Research, 46, 66–72. https://doi.org/10.1016/j.cemconres.2013.01.014
Mróz, P., & Mucha, M. (2018). Hydroxyethyl methyl cellulose as a modifier of gypsum properties. Journal of Thermal Analysis and Calorimetry, 134, 1083–1089. https://doi.org/10.1007/s10973-018-7238-3
Sun, H., Cai, C., Tang, F., Qian, J., & Zhang, J. (2024). Optimization of strength and microstructural properties of building gypsum by ternary Ca(OH)₂–citric acid and PCEs additives. Case Studies in Construction Materials, 20, e03396. https://doi.org/10.1016/j.cscm.2024.e03396
Cao, W., Yi, W., Yin, S., Peng, J., & Li, J. (2021). A novel low-density thermal insulation gypsum reinforced with superplasticizers. Construction and Building Materials, 278, 122421. https://doi.org/10.1016/j.conbuildmat.2021.122421
Feng, C., Wang, Y., Wang, L., Zhao, X., Zhang, W., Zhu, J., & Du, M. (2024). Improving the water resistance of gypsum-based building materials with slag activated by calcium oxide. Journal of CO₂ Utilization, 90, 102996. https://doi.org/10.1016/j.jcou.2024.102996
British Standards Institution. (2008). BS EN 13279-1:2008, Gypsum binders and gypsum plasters—Part 1: Definitions and requirements. https://doi.org/10.3403/30171553
ASTM International. (2026). ASTM C472-26, Standard test methods for physical testing of gypsum, gypsum plasters, and gypsum concrete. https://www.astm.org/
Qi, H., He, L., Tan, H., He, X., Yang, J., Su, Y., Jin, Z., & Zhang, J. (2024). Effect of phosphate impurities on the properties of β-hemihydrate gypsum pastes plasticized by polycarboxylate superplasticizer. Materials Today Communications, 40, 109737. https://doi.org/10.1016/j.mtcomm.2024.109737
Bouhayek, A., & Cherkaoui, K. (2026). Chemical admixtures for sustainable gypsum plaster: A comprehensive review of mechanisms, performance trade-offs, and eco-friendly pathways for construction applications. Next Materials, 102800. https://doi.org/10.1016/j.nxmate.2026.102800





